PC Repair Help: Keyboard shortcuts everyone should know

How to Repair Your Computer

Computer repair is important because we are becoming dependent on it for every personal and professional task. There are variety of problems; some are simple while others are complicated. However, you can repair your system on your own by following some tips and tricks. Some of them are discussed here:

Computer freezing

Computers may freeze on account of any hardware or software issue, so here you need to understand the exact reason behind it. Notice if the issue started when you connected any hardware peripherals like a printer or scanner; then it might be due to a driver conflict. If the issue occurred after assembling a new hard drive, then it might be due to insufficient power or too much heat.

Follow the troubleshooting pattern below to repair your computer, if such problems occur.

First Things First If you leave your computer on all the time, you can often fix a problem by unplugging it, waiting at least 30 seconds, and plugging it back in. By cutting off the power to the motherboard, it allows the hardware to reset and the memory to clear.

Inspect Your PC for Heat-Related Issues Any time you need to open up your computer cabinet, shut down your computer and unplug it. If you have long hair, tie it back. Take off any jewelry that might get in the way. Also avoid wearing any clothing that produces a lot of static, as a spark can damage hardware and cause intermittent, hard-to-troubleshoot problems.

Open the cabinet of your computer and check the temperature of the metal chassis. If it’s hot, then certainly there is some thermal problem. Gently examine the front and rear fans and blow out any dust. You can apply a clean cloth to dust out hidden particles. Remember: Your computer must be shut down while you're cleaning inside it.

If you have more than one hard drive in your computer, avoid installing them right next to each other in the chassis; this makes them more prone to heat failure. To install an extra hard drive in a wide slot, such as the slot that holds your CD-ROM or DVD-ROM drive, you can buy mounting brackets at a store that sells computer parts.

Even if your computer isn't having problems, it's a good idea to clean the fans regularly.

Before you close up the case, check all the cables and make sure everything is still plugged in. If you have to reseat a video card or a stick of memory, avoid applying heavy pressure to the motherboard as this can damage it.

Inspect your Device Drivers Many times when doing a Windows Update, your system may download and install an incorrect driver, which may result in the computer freezing. You can check the status of drivers from Device Manager. Unplug your USB device, if connected. Power-on your computer and see if it works. If it does, good; otherwise you can restore your computer to an earlier configuration. System Restore will roll your system back to an earlier set of drivers.

You can find System Restore at Start>Programs>Accessories>System Tools>System Restore.

Inspect your Hard Disk Your hard disk is a storehouse of information, so when it gets used for a long duration it might get cluttered and patchy; this slows down the performance of your computer. Hence, use your Windows utility CHKDSK to scan and remove bad sectors on regular basis. It is the best preventive way of maintaining computer health.

Blue Screen of Death A more difficult time comes when your computer refuses to load any startup applications. In computer language, it is termed as "Blue-Screen of Death". There can be several causes behind this evil trauma. Let’s start with computer repair job.

Hardware Issues Any hardware conflicts can lead to this problem. Hence, if you have done any hardware replacement make sure that it’s up to the specification of your motherboard.

Rogue Programs These days, the Internet is flooded with a range of malicious programs such as spyware, adware and Trojans. These gain access to your computer through loopholes in application software or in the operating system. To eliminate these programs and fix your computer, scan with a compatible anti-virus program.

Registry Errors The Windows Registry holds information regarding hardware and software settings on your computer. If a malicious program corrupts the Registry, it may result in a blue screen error.

These problems could be fixed either manually, by editing the Registry directly, or with third-party software that can check and repair a corrupted Registry. Always back up the Registry before attempting to edit it.

Tags: pc repair help, free pc help, pc home help, computer problems, how to fix a computer, pc help, fix pc, pc doctor, slow computers, pc troubleshooting .

How to Reduce Computer Repair Costs

Increased computer usage is likely to increase the computer repair costs. Here are some simple methods for reducing such costs.

1. Run a disk defragmentation tool. This enhances the computers performance as well as taking pressure off the hard drive.

Check Out My Favourite tools below

- Advanced System Care

- CCleaner

- WinUtilities

2. Remove any programs that you don't need anymore. There are programs available for this function but the two blow are some of the best out there.

- IObit Uninstaller

- Revo Uninstaller

3. Use a good antivirus and make sure it is switched on. there are alot of good free AntiVirus Software but i can recommend you to a few.

- Panda AntiVirus

- Bitdefender AntiVirus

- Avast AntiVirus

- Malwarebytes Anti-Malware

- AVG AntiVirus

4. Use a good antispyware program. Protecting your computer from damaging spyware, adware and malware is crucial to make sure your PC runs as quickly as possible whilst at the same time ensuring that your information isn't compromised. i know i already listed Malwarebytes Anti-Malware is the antivrus category but its still a good antispyware program

5. Run a registry cleaner regularly.

- CClearner

6. Learn to do simple self-repair work. Read up on ways that you can fix simple problems with your computer.

7. Be careful when downloading files from the internet.

8. Be careful with your computer. Don't punch it or slam in the disc drive. Don't stick things inside the openings on your computer.

Monday, 19 May 2014

Keyboard shortcuts everyone should know

Using keyboard shortcuts can greatly increase your productivity, reduce repetitive strain, and help keep you focused. For example, highlighting text with the keyboard and pressing Ctrl + C is much faster than taking your hand from the keyboard, highlighting the text using the mouse, clicking copy from the file menu, and then putting your hand back in place on the keyboard. Below are our top 10 keyboard shortcuts we recommend everyone memorize and use.

Ctrl + C or Ctrl + Insert

Both Ctrl + C and Ctrl + Insert will copy the highlighted text or selected item.

Ctrl + V or Shift + Insert

Both the Ctrl + V and Shift + Insert will paste the text or object that's in the clipboard.

Ctrl + Z and Ctrl + Y

Undo any change. For example, if you cut text, pressing this will undo it. This can also often be pressed multiple times to undo multiple changes. Pressing Ctrl + Y would redo the undo.

Ctrl + F

Pressing Ctrl + F opens the Find in any program. This includes your Internet browser to find text on the current page.

Alt + Tab or Ctrl + Tab

Quickly switch between open programs moving forward.

Tip: Press Ctrl + Tab to switch between tabs in a program.

Tip: Adding the Shift key to Alt + Tab or Ctrl + Tab will move backwards. For example, if you are pressing Alt + Tab and pass the program you want to switch to, press Alt + Shift + Tab to move backwards to that program.

Tip: Windows Vista and 7 users can also press the Windows Key + Tab to switch through open programs in a full screenshot of the Window.

Ctrl + Back space and Ctrl + Left or Right arrow

Pressing Ctrl + Backspace will delete a full word at a time instead of a single character.

Holding down the Ctrl key while pressing the left or right arrow will move the cursor one word at a time instead of one character at a time. If you wanted to highlight one word at a time you can hold down Ctrl + Shift and then press the left or right arrow key to move one word at a time in that direction while highlighting each word.

Ctrl + S

While working on a document or other file in almost every program pressing Ctrl + S saves that file. This shortcut key should be used frequently anytime you're working on anything important.

Ctrl + Home or Ctrl + End

Ctrl + Home will move the cursor to the beginning of the document and Ctrl + End will move the cursor to the end of a document.

Ctrl + P

Open a print preview of the current page or document being viewed. For example, press Ctrl + P now to view a print preview of this page.

Page Up, Space bar, and Page Down

Pressing either the page up or page down key will move that page one page at a time in that direction. When browsing the Internet pressing the space bar also moves the page down one page at a time.

Tip: If you are using the space bar to go down one page at a time press the Shift key and space bar to go up one page at a time.

PC Repair Help